变频卷筒电缆
- 厂家信息
- 产品信息
- 规格参数
- 技术文档
产品图片
变频卷筒电缆
1、产品特点及用途 Application
本产品适用于交流额定电压0.6/1kV及以下变频控制系统作供电电缆或电气连接，产品具有较强的耐电压冲击性，性 能经受变频时的脉冲电压，电缆具有良好屏蔽性，并能消除电磁干扰，降低变频电机噪音保证系统稳定运行。广泛用于冶金、电力、石化等行业。
The cable are used as power supply or connection lines in frequency-controlled systems under 0.6/1 kV. The product has resistance to voltage shocks and impulse voltage. It has good shielding layer to eliminate electromagnetic interference, reducing the noise of frequency-controlled motors, and ensuring the normal running of the motors. They are widely used in metallurgy, power plants, petrol chemical industries.
2、产品执行标准 Executive standards
阻燃耐火特性试验执行 GB12666-90标准 Flame-retardant conforms to GB12666-90企业标准 Q/AT006-2010 Company standards Q/AT006-2010
3、使用特性Working conditions
1、交流额定电压：U /U 0.6/1kV ;
最高工作温度：硅橡胶绝缘180℃; F46绝缘 200℃和260℃两种；
最低环境温度：固定敷设不底于-60℃;
聚氯乙烯70℃ ;交联聚乙烯90℃ ;
2、电缆安装敷设温度应不低于0℃(氟塑料、硅橡胶、丁腈护套电缆不低于-25℃);聚氯乙烯护套电缆不低于-40℃;
3、允许弯曲半径：最小为电缆外径的15倍。
1.Rate voltage: U /U 0.6/1 kV;
Max. working temperature: 180℃ for silicon rubber insulation; 200℃ and 260℃ for F46 insulation; 70℃for PVCinsulation; 90℃ for XLPE insulation;Min. ambient temperature: not lower than -60℃for fixed erection; not lower than -40℃ for PVC sheathed cable;
2.Erection temperature: not lower than 0℃ (not lower than -25℃ for fluoro-plastic, silicon rubber and NBRsheathed cable);
3.Allowable bending radius: Min. 15D.
1、产品特点及用途 Application
本产品适用于交流额定电压0.6/1kV及以下变频控制系统作供电电缆或电气连接，产品具有较强的耐电压冲击性，性 能经受变频时的脉冲电压，电缆具有良好屏蔽性，并能消除电磁干扰，降低变频电机噪音保证系统稳定运行。广泛用于冶金、电力、石化等行业。
The cable are used as power supply or connection lines in frequency-controlled systems under 0.6/1 kV. The product has resistance to voltage shocks and impulse voltage. It has good shielding layer to eliminate electromagnetic interference, reducing the noise of frequency-controlled motors, and ensuring the normal running of the motors. They are widely used in metallurgy, power plants, petrol chemical industries.
2、产品执行标准 Executive standards
阻燃耐火特性试验执行 GB12666-90标准 Flame-retardant conforms to GB12666-90企业标准 Q/AT006-2010 Company standards Q/AT006-2010
3、使用特性Working conditions
1、交流额定电压：U /U 0.6/1kV ;
最高工作温度：硅橡胶绝缘180℃; F46绝缘 200℃和260℃两种；
最低环境温度：固定敷设不底于-60℃;
聚氯乙烯70℃ ;交联聚乙烯90℃ ;
2、电缆安装敷设温度应不低于0℃(氟塑料、硅橡胶、丁腈护套电缆不低于-25℃);聚氯乙烯护套电缆不低于-40℃;
3、允许弯曲半径：最小为电缆外径的15倍。
1.Rate voltage: U /U 0.6/1 kV;
Max. working temperature: 180℃ for silicon rubber insulation; 200℃ and 260℃ for F46 insulation; 70℃for PVCinsulation; 90℃ for XLPE insulation;Min. ambient temperature: not lower than -60℃for fixed erection; not lower than -40℃ for PVC sheathed cable;
2.Erection temperature: not lower than 0℃ (not lower than -25℃ for fluoro-plastic, silicon rubber and NBRsheathed cable);
3.Allowable bending radius: Min. 15D.
